You may feel that your bike is releasing more heat. There could be many reasons for raising the temperature of your dirt bike. My dirt bike recently got too hot, and I found out that there are several reasons why this happens.
I have listed all the dirt bike overheating causes. Overheating can be a problem for your dirt bike if you don’t take the time to understand these 7 causes of overheating.
Whether it’s a 4 or 2 stroke, a neglected dirt bike can boil at any time. Your dirt bike may be overheating for a number of reasons.
ADVERTISEMENT
Some of them include: insufficient coolant, a faulty radiator cap, a blown head gasket, a dysfunctional water pump, insufficient jetting, inadequate air flow, an empty coolant tank, etc.
What is Overheating on A Dirt Bike?
If your dirt bike’s engine gets too hot, it could get damaged and stop working as well as it should.
This is engine overheating. Knowing the signs of engine overheating helps maintain optimal operating temperature.
In temperatures above 80 degrees Celsius (105 degrees Fahrenheit) or below 60 degrees Celsius (140 degrees Fahrenheit), your dirt bike’s engine may overheat and catch fire if you’re using a 4 stroke model.
ADVERTISEMENT
This article will help you identify the issue, its symptoms, and how to prevent it.
How Do You Know If Your Dirt Bike is Overheating?
Be patient, it takes a while to boil. Your bike, like a child, will keep giving you signs that something needs to be fixed or changed before it becomes too costly. I’ll list a few warning indicators of overheating below.
When it overheats, smoke or steam may appear to be coming from the radiators. This means the bike’s internal temperature is high enough to steam.
The second sign is the perception of a sweet smell where none actually exists. This means the bike’s internal temperature is high enough to steam.
There could be coolant leaking out of the overflow, so check out that odd job, too. As was indicated earlier, the fluid will boil if the bike becomes too hot. Because of this, liquid begins to flow outside as a result of the boiling.
It’s possible that, despite your best efforts, the engine is jammed and won’t start. The presence of this symptom may be indicative of the elevated temperature.
After then, while speeding, you’ll notice that the bike’s once-magical power has diminished. Maximum speed can be reached sooner, but under these conditions, performance suffers.
When the seals on your dirt bike start to leak oil, it could be dangerous and could even start a fire. There is a separate post on this subject available on this website if you are interested in eliminating oil leakage from your dirt bike. To read and understand why a dirt bike leaks oil, click here.
The cylinders also get hotter than usual, which is the final symptom. Without gloves, it’s unsafe.
If you find anything unusual as written above, it’s time to fix it.
Why Is My Dirt Bike Overheating?
Riding on rough terrain or mechanical issues can cause a dirt bike to overheat. If you ride your dirt bike over rough terrain, the engine will overheat.
What about the bikes’ flaws? Let’s check that to see if we can fix it fast.
1. Low Or Empty Coolant
First, check the quantity of liquid inside. Then remove the radiator cap and check again. Such inspections can prevent further major damage.
If you find something strange, like the bike’s radiator is getting empty after every ride and you need to refill it regularly, it means there is a crack.
Find the hole in the blown gasket, either in the base, head, or water pump. Also check the hole in the radiator or in the hose. This step will protect both your bike and your large sum.
2. Improper Coolant Ratio
A bike has a coolant capacity of 3–4 liters maximum. There are various coolants available on the market that are premixed or antifreeze.
Some need 50:50 distilled water dilution. If this ratio goes wrong, there will be no meaning to using coolant on your bike.
3. Bad Radiator Cap
Radiators are used to prevent leakage or overflow, but a faulty radiator cap can cause leaks, and hence your bike starts to overheat.
Such bad radiators also permit air and liquid to overflow when the pressure inside becomes high.
4. Water Pump Is Not Working
A dead water pump is unable to circulate coolant through the dirt bike and hence shows overheating.
If your bike is producing annoying sounds, it means the water pump is not working well.
If you keep avoiding the leakage from the water pumps, it will cause corrosion and, as a result, will seize the engine in a long way. But fixing a faulty water pump isn’t hard. Fix it as soon as you notice it.
5. Blown Head Gasket
If you are running your bike with a blown head gasket, it is more likely that the exhaust will release white smoke.
This is a sign that the coolant is burning inside. Even if you replace the blown head gasket, it can have a negative impact on the engine.
Repair the damage before it becomes worse. A head gasket can be fixed in the early stages, but a damaged base gasket will hit you hard financially.
A damaged base gasket could leak to the transmission and a low amount of coolant in the radiator will seize the piston and cylinder.
In the end, these two parts will be the reason behind the overheating.
6. Bike Is Running With Low Jetting
When you ride your bike with low or lean jetting, it will start burning more air than fuel, and we know that air gets hotter faster than fuel. More hot air means the engine will produce more heat, which increases the temperature.
If you keep riding with low jetting, it can burn out the piston and damage the engine. It’s better to keep tuning your carburetor to improve performance, ride quality, and overall reliability.
7. Insufficient Air Flow
Only water and coolant are not responsible for running the cooling system effectively; air is also responsible equally. The amount of airflow over the radiators will keep them cool.
Slow speeds cause overheating because airflow is low and fuel flow is low. The engine burns hotter with low fuel. Low fuel means the engine burns hotter than normal.
How To Prevent Your Bike From Overheating?
You have seen the causes of overheating; now the next step is to fix the problems to prevent further disaster. You may need to replace some of the bike’s parts or need extra protection.
There are very simple tips to use as a routine. I have selected some of those common tips that will help you.
Keep changing your coolant and better use high quality coolant. It will maintain the temperature of your bike and don’t forget to check your dirt bike’s condition.
Use a strong radiator cap that can withstand higher pressure and also has a temperature gauge to help with this.
Use a radiator guard or race brace to protect it from further damages if you crash somewhere.
Inspect your water pump, it shouldn’t be faulty.
Always use higher octane and lower boiling fuel gas that can keep your bike from overheating. Whenever you change your fuel, also change the carburetor jetting.
Also do regular servicing and inspect cooling systems, such ignorance can cause serious problems.
Never let your bike idle under hot summer days, this will also affect the bike’s cooling system badly.
Maintain the mixing ratio of coolant and water so that it could work effectively.
Following the above mentioned tips can save you a lot, no damages, no extra cost and no risk of explosion.
Ride Your Bike Properly To Avoid Overheating
If a bike doesn’t cause overheating, sometimes you are responsible. A rider should know the riding techniques that can help to prevent overheating. Check out the below given tips that are implemented to keep your bike cool.
Don’t let your bike idle for a long period, as the air and fuel entering the engine will not get adequate time to burn as desired. When a bike sits idle, all the liquid tends to settle at the bottom, leaving the upper portion of the gear dry.
Once you pass through the technical tasks, open up the throttle to permit more fuel to flow into the engine. It will help to cool the engine and improve airflow over the radiator.
Use the clutch as much as possible while riding. Frequent clutch use strains the engine, reducing airflow. Don’t double clutch until it’s needed.
Don’t hold the throttle open for too long when there is no wheel spinning. Throttle also plays a major role in crossing the temperature boundaries.
When you can feel the overheating of your bike, be careful while opening the radiator cap. The boiling water may spill out and burn your hands.
If the dirt bike overheats while riding indoors, turn it off and let it cool. Or you can use water to spray on the radiator so that cooling will be easy.
The most important thing is to follow the instructions given by professionals when you buy your bike or rebuild the engine. The quality of the engine and other parts also plays a role in overheating.
If you follow these useful tips, I’m sure only 0.1% will remain to cross the temperature range as I told you at the beginning of the article.
Conclusion
For optimal performance and engine protection, you must understand the 7 reasons your dirt bike is overheating. You can prevent dirt bike problems like low coolant, cooling system blockages, malfunctioning parts, and external factors by identifying them. Regular maintenance, proper coolant levels, and prompt problem-solving ensure a cool, enjoyable ride. Stay cool and enjoy your dirt bike adventures!
