For riders, it is terrifying and dangerous if your headlight is dim, dead, or fading. If you ignore it and do not go through a proper repair, you could face various problems.
Here are the 5 reasons why you should read them right now, if you don’t want to get into trouble.
Just like our eyes, a motorcycle’s headlight is an important part that can’t be done without. Constantly inspecting your bike’s bulbs, wiring, setup, etc. can help you avoid riding in the dark. Another thing that could be causing the gloomy effect is old lenses, so make sure you swap those out as well. In this essay, I’d want to go over the reasons for this and the ways to fix it.
Why is My Motorcycle Headlight Dim?
1. Burnt Out Bulb:
The most common issue with headlights is weak or nonexistent illumination caused by failing or blown bulbs. Fortunately, changing out light bulbs is a common issue with the simplest solution.
Headlight bulbs, like those in your house, eventually burn out and must be changed.
If you frequently drive at night or tend to leave your headlights on while it’s daylight out, you may find yourself changing your headlight bulbs more frequently than you’d want.
When you drive late at night for services like Uber or Lyft, or do deliveries, you may find that your light bulbs fail more frequently than usual.
It’s also a bad idea to drive an older car whose headlight bulbs have never been replaced.
2. Lens Oxidation:
It may come as a surprise to some motorists to realize that a dim headlight is often not the consequence of a burned-out bulb.
Likewise, the lenses themselves should be held responsible. Headlight lights are typically shielded by acrylic lenses. These substances may react to the sun’s UV rays due to the presence of chemicals.
When lenses oxidize, they take on a hazy, worn look. The lenses are not receiving as much light as they should because of the oxidation’s thick tint. This can reduce the efficacy of your headlights, even if you’ve just replaced the bulbs.
If your headlight lenses are cloudy because of oxidation, a mechanic can help you keep them from getting worse by using professional tools and his or her knowledge.
3. Wiring Troubles:
All the electrical components, including the bulb, the wiring harness, the fuse, and the circuit breaker, must operate together to power the bulb.
Your vehicle’s headlights derive their energy from these components. A wiring issue could be the cause of dim headlights, misfires, or no illumination at all.
Even though electrical issues are uncommon, they do arise. In addition, they are more likely to occur if you have recently tinkered with your headlights or attempted any do-it-yourself modifications.
The specifics of your wiring issues will determine the best approach to fixing your headlights. Perhaps you need a fuse replaced, a new wiring harness installed, or any other electrical service.
An electrician with an A.S. in Mechanical Engineering will inspect your lights and help you figure out what’s wrong and how to have them fixed.
4. LEDs vs Incandescent Bulbs
When riding, have you ever used your headlights so bright that they were practically blinding? Even if they aren’t the brightest, light-emitting diode (LED) headlights will nonetheless look significantly better than their traditional counterparts.
And thus, if you’re still using incandescent bulbs, you can start to think your headlights look dimmer than they actually are.
5. Setting Configuration
These days, motorists have a choice between multiple illumination settings in their automobiles. It’s important to double-check the settings on your headlights if you notice that they are dim or no longer working.
Unless manually adjusted, most modern headlights adapt to their surroundings automatically.
Some motorists can “set it and forget it,” as the saying goes. You might not immediately think to double-check the lighting setup after a bump or a guest driver makes a change.
There’s a chance you’re driving with your fog lights on instead of your regular headlights, even though it looks OK. If you’re having this problem, your headlights may need to be set back to how they were before.
What Causes Headlights To Dim?
When visibility is low, you will need to rely on your motorcycle’s headlights even more than usual.
Good visibility also benefits the other riders who may be sharing the road with you. Dim headlights could be an indication of an issue that needs fixing.
Here are five possible causes for your dim headlight:
- Ageing Headlight Lenses
- Discoloured Bulb
- Ground Wire Corrosion
- Failing Alternator
- Worn Alternator Belt
How Long Do Motorcycle Headlights Last?
If you’re trying to guess how long your headlights last, you’ll need to know the type of bulbs in your headlights.
There are three common types of the bulb on the market today—Halogen, HID, and LED bulbs. Each has its benefits, but we’ll focus on longevity for now.
Headlight bulb type | Lifespan |
LED | 30,000 hours |
HID | 2,000-3,000 hours |
Halogen | 500-1000 hours |
When compared to the other two types of bulbs, halogens have the shortest lifespan. A halogen light bulb will typically last between 500 and 1,000 hours.
The answer is “bulb-specific.” Choose high-performance bulbs for more illumination, but know that they won’t last as long. The eco or long-life bulb is a good choice for drivers who are concerned about cost or the environment.
A halogen bulb in this category can survive up to three times as long as a regular bulb, albeit its brightness may be diminished slightly.
The next step is HID lights. The longevity of these bulbs is far greater than that of halogen bulbs, although it is still shorter than that of LED bulbs.
Between 2,000 and 3,000 hours is the typical lifespan of a HID bulb. That’s as much as a sixfold improvement in longevity over the most flimsy halogen lamps. A high-intensity discharge (HID) bulb has a long life expectancy.
Finally, out of the three types of headlight bulbs we’ve covered, LED lights have the longest lifespan. Almost 30,000 hours of use is the average lifespan of an LED light bulb.
It lasts the lifetime of many automobiles, so you might never have to replace it.
Light-emitting diodes. Be sure to verify local regulations before installing LED headlights on your motorcycle, as not all of them are street-legal.
How Can You Fix a Dim Headlight?
You can restore the light output of dim headlights by cleaning the ground connection. Put some dielectric grease on it, too. If you notice a grey or brown film inside the bulb’s glass, you should replace it.
Take it apart, give it a good wire-brushing, and then put it back together. To prevent corrosion, lubricate the parts using dielectric grease.
Having a motorcycle with a headlight that is no brighter than a flashlight with dead batteries is no longer an issue, as we now offer two easy solutions.
Most bikers would blame a faulty power connection or switch if their headlights stopped working. However, a corroded ground wire may be to blame for dim headlights in some cases.
Follow the wires from the back of each headlamp assembly to their source in the car. Thoroughly clean it.
As an additional theory, the headlight filaments may produce a grey/brown film coating on the inside of the bulb as they age. Long-term exposure to that coating can reduce visibility by as much as 300 feet.
When you remove a headlight bulb and examine the glass, you may notice a gray or brown deposit that dulls the light. You’ll be able to see the road again so long as you replace both bulbs.
How Can You Fix Oxidized Headlights?
Vinegar might work well as a cleaning solution in and of itself.
Not to mention that sodium bicarbonate has strong enough chemical activity to remove stubborn light responses and dirt buildup.
How Can I Make My Headlights Super Bright?
By cleaning and restoring your headlight lenses, you get the pure, brilliant light you need to drive carefully.
- Keep your headlight clean and clear.
- Remove any hazardous debris
- Replace the bulb for renewed performance.
How Bright Should a Motorcycle Headlight Be?
Functionally, the headlamp can produce 2800 lumens on low and an incredible 4000 lumens on the light beam.
You can imagine how white and dazzling this headlamp is with a color temperature of roughly 6500K.
How far should a motorcycle headlight shine?
Your headlights provide a maximum of about 350 feet of visibility. You should maintain a steady speed when driving so that you can easily slow down or make a turn if necessary.
When you’re less than 500 feet away from an oncoming car, switch to low beams.
Are LED Headlights Better on Motorcycles?
Yes, motorcycles with led lights are always the best option. LEDs are about 90% more efficient than incandescent bulbs, and their lower heat output means they may be used for considerably longer than most other types of lighting.
Also, while LEDs do eventually fade in brightness, unlike traditional bulbs, they do not typically burst.
Can I Change the Halogen Bulb to LED on My Bike?
That would depend upon the LED that you need to alter. You can get LED bulbs that are a straight swap for your incandescent bulbs. Some have had problems with beam patterns in jurisdictions where a selected beam height and pattern could be required.
If you swap the whole light source, you’ll probably suffer from these problems if you do not get the initial setup right.
Why Are LED Headlights So Bright?
Diode lightweights will appear brighter than traditional bulbs while really producing the same amount of light, per the United States Environmental Protection Agency and the United States Department of Energy.
Why? The color of older headlights is more muted and golden. Lightweight diodes produce a sharp white light with a faint blue tint.
The contrast between this color and the nighttime is even more jarring. So, even though they produce the same amount of light, diode headlights will appear much brighter than incandescent bulbs.
The pros: The long lifespan of LEDs is a plus for certain motorists. A number of people think it provides excellent sight when riding, but others disagree.
The cons: The light from the LEDs is white, and it’s bothering the rider on the other side of the road. When a white light shines directly on the driver of the other car, the chances of a crash are very high.
If you’re curious about more powerful lighting options, discuss bulbs with your service advisor.
Top 5 Bulbs Best for the Motorcycle Headlight:
1. Osram Rallye HS1 Halogen 62185RL Headlight Bulb (12V, 45/40W)
Osram, the pioneer player in the global lighting industry, offers the most feasible bike headlight bulbs.
Besides the affordable price range, excellent visibility and assured safety are why you get this headlight bulb for your motorcycle.
The offered headlight bulb comes with 45/40W power output and is known for its long-range beam that ensures enhanced on-road visibility.
2. Osram HS1 Silver Star 64185SVS- Headlight Bulb (12V, 35W)
Osram is Known to provide around 60% more light and up to 20 m longer beam, and the offered headlight bulb will help you quickly spot hazards, signs, and road markings.
If you are planning to or are already engaged in the long night driving, this headlight bulb will offer you an enhanced field of vision, ultimately improving your ride experience.
3. Niki NO2H LED Headlights AC/DC Bulbs
Why compromise with a representative part for your bike that helps you to identify roadblocks, turns, potholes, unique sign boards, etc., on the road?
Get the AC/DC headlamp bulbs from Nikavi that will provide excellent visibility once you ride your motorbike.
The light-emitting diode headlamp lamp kit is accessible with four2W 4400lm 6000K specifications and comes with four items.
4. BLP H4 Led Headlight Bulb
This headlight bulb is highly praised for its super performance in rainy and harsh weather conditions.
This headlight bulb comprises top-notch aluminium material and a 360-degree beam angle that ensures a more comprehensive and clear on-road view.
5. AutoPowerz LED Headlight Bulb with H4 Fitting
If you’re an everyday bike rider and experiencing visibility problems throughout the night, it is time to verse your bike with the LED headlamp bulb from AutoPower.
Gettable with each high & beam of light, you’ll be able to install this headlamp bulb in the middle of your bike.
In addition to the current, the ability specification of this headlamp bulb is 40W (for high beam) and 20W (for low beam).
Conclusion
If you’re riding at night with a dim headlight, it’s even more dangerous. Having read these 5 reasons, you should be able to eliminate it without any difficulty.
If you found this post helpful, please consider sharing it with your friends and family who may also be confused by the motorcycle’s weak headlight. We’re doing our best to give you solid advice. If you’re interested in hearing more about the things we cover, sign up for our newsletter!